1 CH WiFi Smart Switch compatible with Alexa, Echo, Google Home and IFTTT (No Hub Required). Mini & Safe design, Works with AC 100V-240V, 10A maximum load. Supports Remote control,Voice control,Schedule function,Device Sharing. Remotely turn On/Off your appliancesw from anywhere at any time. Home automation is "The Internet of Things". It simply means the way all devices or appliances are networked together to provide users with a seamless control over their home equipment. ZDSW-002WF is an affordable WiFi smart switch that provides users with smart home control. It is a remote control power switch that can connect to a wide range of appliances. WiFi electrical switch transmits data to a cloud platform through the WiFi Router, which enables users to remotely control all the connected appliances, via the mobile application. It can control varous load type switch, such as LED lamps, incandescent lampt, fluorescent lamp and fungsten filament lamp, Touch remote switch & remote control to turn on/off the lights conveniently. WiFi controlled switch makes all home appliances smart. As long as the mobile has network, users can remotely control the appliances by turning them on off from anywhere at any time. Another feature available is to set timing schedules for the appliances, which can include countdown on/off, scheduled on/off, and can thus, help users maintain an easy life.
Main Features Up, down, stop of the lifter can be controlled by the panel button, remote control and central controller. When the lifter reaches the top, the LCD will turn to angle of elevation automatically. When the LCD screens drops, the lifter will close the door automatically. When the lifter drops, the door starts anti-pinch function. The lifter can realized remote control by RS232,RS485 protocol.
Main Features ●Stylish, low profile design with touchable interface ●5G Standard WiFi Wireless communication, with less delay and high quality sound while no interference from 2.4G signal, setting up all system in few minutes to be ready for using, and put them away in short time as well ●Built-in DC connector for power supply without battery ●Detachable battery pack is easy to replace and charge, 20 hours continuous working time after full charge. ●Internal high fidelity loudspeaker ●Head-set interface in both sides with volume adjust ●Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference ●Full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices. ●Support pluggable microphone and different length of microphone with strong audio collecting ability. ●Timer on display to set certain time for each delegate to speak, will remind user or close the MIC automatically ●All units can be configured as Chairman or Delegate unit through software settings based on model WDC-T
Card Reader: RFID type ID access control card reader, Reading Distance is about 3-15CM; Support Wiegand 26bits/ Wiegand34bits /ABA Standard Format Data Output. It's widely use for Access control, Parking lot, Campus ID, Time attendance, Hotel Management, Transportation, etc. How to use: When the card approach the reader, The RED LED turn into green, After flashing, then turn RED color again, the buzzer sound shows transmiting data. It has 500mS proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not transmit the data, neither giving any sound indication, but for different ID card entering proximity area, reader will response continually and send out the data.
Main Features Can accommodate VIS-VLI703A series receivers Universal mains power facility allows use worldwide Rapid recharging: within 2 hours Capable of charging 50 receivers. LEDs to indicate the charging status of the rechargeable batteries The charging box also has the function of storing receiver
Main Features ●Stylish and modern design with touchable button ●ARRA-TechTM Microphone array technology and the voice pick-up distance up to 120CM ●Priority button and approval button for chairman unit ●Standard CAT5e and RJ45 connectors are used in microphone to provide more convenient on project and maintenance. ●One 1.5m cable out to connect the splitter box and keep the table clear ●The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices. ●Strong system robust by the "Hand-in-Hand-Loop-Network" connection technology ●Support plug and play